23
4
OPERATION
■
Function for CW
ï
Connection for CW
1
2
3
4
8
7
6
5
9 10 11 12
13
Paddle
[ELEC KEY]
[MICROPHONE]
See p. 25 for connection details:
Paddle operation from front panel
MIC connector.
Straight key
Microphone
Initial set mode setting (p. 32)
4
8
12
[ACC]
1
2
3
7
6
5
9 10 11
13
For no break-in operation:
Connect an external switch such as
a foot switch; or use the RTTY
SEND terminal for all bands.
(See p. 25)
: normal
: reverse
: off
: UP/DN key
ï
CW operation
q
Connect a paddle or straight key as above.
w
Select CW (or CW-REV) programmed channel.
e
Set CW break-in operation as semi break-in, full
break-in or OFF. (see p. 30)
• Push [SET] for 1 sec. to enter
quick set mode.
• Push
[UP
Y
] or [
Z
DN] several times until “BK-IN” ap-
pears, then rotate the channel selector to select the
desired condition:
FL: full break-in
SE: semi break-in
oF: no break-in
r
Set the CW delay time when semi break-in opera-
tion is selected. (see p. 30)
• Push [SET] for 1 sec. to enter
quick set mode; push
[UP
Y
] or [
Z
DN] several times until “BK-DELAY” ap-
pears, then rotate the channel selector to select the de-
sired delay time.
CW mode and semi
break-in operation
is selected.
Delay time of 6 dots
is selected in quick
set mode for semi
break-in operation.