Icom IC-7600 Скачать руководство пользователя

Страница: 69 / 196

RECEIVE AND TRANSMIT

Functions of the PSK decoder display

EXIT/SET

F-3

F-6

F-5

Band keys

F-2

RTTY/PSK

HOLD/CLR

WIDE

DECODE AFC/NET

• AFC/NET indicators

Main dial

F-4

F-5

DEF

ADJ

Push a band key to select the desired band.

Push

[RTTY/PSK] to select PSK.

• After the PSK mode is selected, hold down

[RTTY/PSK] for 1 second to toggle between the PSK
and PSK-R modes.

• “PSK” or “PSK-R” appears.

Push

[DECODE] (F-3) to display the decode

screen.

• When tuned into a PSK signal, decoded characters are

displayed in the RX contents screen.

Push

[HOLD/CLR] (F-2) to freeze the current

screen.

• “

” appears while the function is in use.

• Push

[HOLD/CLR] (F-2)

again to release the function.

Hold down

[HOLD/CLR] (F-2) for 1 second to clear

the displayed characters.

• The “

” indicator disappears at the same time as

the displayed characters are cleared. (The hold function
is cancelled.)

Push

[WIDE] (F-6) to toggle the PSK decode

screen size between normal and wide.

• S/RF meter type during wide screen display can be

selected in the display set mode. (p. 134)

Push

[AFC/NET] (F-5) to turn the AFC function

ON.

• “

” appears.

• If a PSK signal is received within the AFC tuning range,

the decoder automatically tunes into the signal and the
offset frequency is displayed.

• The AFC tuning range is set to ±15 Hz as the default.

Optional ±8 Hz setting is available in the PSK decode
set mode. (p. 63)

NOTE: The AFC function may not tune the signal prop-
erly when a weak PSK signal is received.

Push

[AFC/NET] (F-5) again to turn the NET

function ON.

• “

” appears.

Hold down

[AFC/NET] (F-5) for 1 second to add

the offset frequency to the displayed frequency.

Push

[EXIT/SET] to close the PSK decode screen.

Setting the decoder threshold level

Adjust the PSK decoder threshold level if some
characters are displayed when no signal is received.

Call up the PSK decode screen as described

above.

Push

[ADJ] (F-4) to select the threshold level

setting condition.

Rotate the main dial to adjust the PSK decoder

threshold level.

• Hold down

[DEF] (F-5)

for 1 second to select the

default setting.

Push

[ADJ] (F-4) to exit from the threshold level

setting condition.

“AFC” and “NET”

indicators

Offset frequency

Threshold level indicator bar

Содержание IC-7600





































































































































































































Результаты поиска

Содержание IC-7600

Отзывы:

Похожие инструкции для IC-7600

Бренды по названию

Популярные бренды

Icom IC-7600, Инструкция по эксплуатации

Результаты поиска

Содержание IC-7600

Отзывы:

Похожие инструкции для IC-7600

Бренды по названию

Популярные бренды