69
9
SET MODE
■
Miscellaneous (others) set mode
(continued)
FM SPLIT Offset (HF)
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
However, this setting is used for HF bands in FM
mode only and is used to input the repeater offset for
an HF band.
The offset frequency can be set from –4 MHz to +4
MHz in 1 kHz steps.
-
-0
0.
.1
10
00
0M
MH
Hz
z
Minus 0.1 MHz offset
(default)
-
-4
4.
.0
00
00
0M
MH
Hz
z
Minus 4.0 MHz offset
FM SPLIT Offset (50M)
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
However, this setting is used for 50 MHz band FM
mode only, and is used to input the repeater offset for
the 50 MHz band.
The offset frequency can be set from –4 MHz to +4
MHz in 1 kHz steps.
-
-1
1.
.0
00
00
0M
MH
Hz
z
Minus 1.0 MHz offset
(default)
+
+4
4.
.0
00
00
0M
MH
Hz
z
Plus 4.0 MHz offset
SPLIT Lock
When this item is ON, the tuning dial can be used to
adjust the transmit frequency while pushing [XFC]
even while the lock function is activated.
See p. 32 for split frequency operation details.
O
ON
N
Split lock function ON
O
OF
FF
F
Split lock function OFF
(default)
Tuner (Auto Start)
The internal antenna tuner has an automatic start ca-
pability which starts tuning if the SWR is higher than
1.5–3.
When “OFF” is selected, the tuner remains OFF even
when the SWR is poor (1.5–3). When “ON” is se-
lected, automatic tune starts even when the tuner is
turned OFF.
O
ON
N
Automatic tuner start
ON
O
OF
FF
F
Automatic tuner start
OFF (default)
Tuner (PTT Start)
Tuning of the internal antenna tuner can be started
automatically at the moment the PTT is pushed after
the operating frequency is changed (more than 1%
from last-tuned frequency).
O
ON
N
Automatic PTT start
ON
O
OF
FF
F
Automatic PTT start
OFF (default)
