IC-746 FAQ
A product review article
http://www.arrl.org/members-only/prodrev/pdf/pr9809.pdf
Der Neue von Icom: IC-746 - mit 100w und DSP auf 11 Bandern
Petermann, Bernd, DJ1TO
April, 1998, Funkamateur, p.392
A product review article (German)
A Remotely Controlled Antenna Switch
Thompson, Nigel, KG7SG
April, 1993, QST, p.32
Uses the band signal on the Icom ACC connector to remotely switch between antennas with
a single feedline. (This article predates the 746, but is still appliccable)
Everything You Always Wanted to Know About Hardware For Computer-Controlling
Modern Radios
Blackburn, Wallace, AA8DX
February, 1993, QST, p.37
Computer control interfaces for several makes and models of transceivers, including Icom.
http://www.arrl.org/members-only/tis/info/pdf/9302037.pdf
A Low-Cost PC Interface for ICOM Radios
Thompson, Nigel, KG7SG
July, 1992, QST, p.37
One of the early/original designs for a homebrew CI-V interface.
How To Build A Super-Simple Computer Interface For The Kenwood TS-440S And
ICOM IC-735
Brown, Paul, NF2B
March, 1992, CQ, p.42
One of the early/original designs for a homebrew CI-V interface.
2.17
Can I transmit 100w at 100% duty cycle on CW, SSB, RTTY, PSK,
etc…?
Yes. All of the 746/756 series were designed to handle continuous 100w output in all modes.
The rig will get quite warm and the fan will run continuously. Be sure you allow adequate
ventilation.
Page 21 of 113
2003-02-08
Содержание IC-746
Страница 36: ...IC 746 FAQ Page 36 of 113 2003 02 08 ...