83
11
SET MODE
2001 NEW
2001 NEW
22.
[ANT] Switch
You can set the antenna connector selection to auto-
matic, manual or non-selection (when using 1 an-
tenna only for the HF/50 MHz bands).
Auto
: The antenna switch is activated and
the band memory memorizes the se-
lected antenna. (default)
Manual
: The antenna switch is activated and
selects an antenna manually.
OFF
: The antenna switch is not activated
and does not function. The [ANT1] con-
nector is always selected in this case.
2 2
A u t o
[ A N T ] S w i t c h
17.
One Touch Rptr
This item turns the one touch repeater function ON
(
DUP-
or
DUP+
) and OFF.
When [F2
DUP
] is pushed for 1 sec. in
M1
, the se-
lected offset direction and the programmed duplex
offset frequency (depending on the operating fre-
quency band) is set with the displayed frequency.
1 7
D U P -
O n e T o u c h R p t r
19.
Auto Tune
The internal antenna tuner has an automatic start ca-
pability which starts tuning if the SWR is higher than
1.5–3:1 in the HF bands.
When “OFF” is selected, the tuner remains OFF even
when the SWR is poor (1.5–3:1). When “ON” is se-
lected, automatic tune starts even when the tuner is
turned OFF.
1 9
O F F
A u t o T u n e
20.
PTT Tune
Tuning of the internal or external antenna tuner can
be started automatically at the moment the PTT is
pushed after the operating frequency is changed
(more than 1% from the last-tuned frequency).
2 O
O F F
P T T T u n e
21.
96OObps Mode
This item turn the 9600 bps data transmission capa-
bility ON and OFF.
ON
: For 9600 bps data transmission.
OFF
: For the regular audio (or slower data)
transmission only.
2 1
O F F
9 6 O O b p s M o d e
■
General set mode (continued)
IC-7400.qxd 02.4.2 11:35 Page 83