![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_service-manual-addendum_3610552237.webp)
4-6
4-5 TRANSMIT ADJUSTMENTS (HF/50 MHz/70 MHz BANDS) (continued)
ADJUSTMENT ITEM
TRANSCEIVER'S CONDITION
OPERATION
ADJUST
POINT
VALUE
AM CARRIER POWER
RATIO
1 • Display: "POWER AM Ratio HF"
• Receive
• Push [SET]. (Automatically starts to
transmit.)
[MAIN DIAL]
30 W
Push [SET]*.
TX POWER & POWER
METER SETTING (50 M)
1 • Display: "POWER 50M"
–
–
Push [SET].
(Automatically starts
to transmit.)
2 • Display: "POWER 50M Min"
• Transmit continues
[MAIN DIAL]
2 W
Push [SET].
3 • Display: "POWER 50M 10%"
• Transmit continues
10 W
Push [SET].
4 • Display: "POWER 50M Tuner"
• Transmit continues
10 W
Push [SET].
5 • Display: "POWER 50M 50%"
• Transmit continues
50 W
Push [SET].
6 • Display: "POWER 50M 100%"
• Transmit continues
100 W
Push [SET]*.
AM CARRIER POWER
RATIO (At 50 MHz)
1 • Display: "POWER AM Ratio 50M"
• Receive
• Push [SET]. (Automatically starts to
transmit.)
30 W
Push [SET]*.
TX POWER & POWER
METER SETTING
(At 70 MHz)
1 • Display: "POWER 70M"
• Receive
–
–
Push [SET].
(Automatically starts
to transmit.)
2 • Display: "POWER 70M Min"
• Transmit continues
[MAIN DIAL]
2 W
Push [SET].
3 • Display: "POWER 70M 10%"
• Transmit continues
5 W
Push [SET].
4 • Display: "POWER 70M Tuner"
• Transmit continues
10 W
Push [SET].
5 • Display: "POWER 70M 50%"
• Transmit continues
25 W
Push [SET].
6 • Display: "POWER 70M 100%"
• Transmit continues
50 W
Push [SET]*.
AM CARRIER POWER
RATIO (At 70 MHz)
1 • Display: "POWER AM Ratio 70M"
• Push [SET]. (Automatically starts to
transmit.)
15 W
Push [SET]*.
ID APC (Verify)
1 • Display: "ID-APC CHECK"
–
–
Push [SET].
(Automatically starts
to transmit.
A beep sounds, and
then another beeps
sound 3 sec. later.*)
ALC METER
1 • Display: "ALC HF"
2 • Display: "ALC 70M"
DRIVE GAIN
1 • Display: "DRIVE HF/50M"
2 • Display: "DRIVE HF/70M"
SWR METER
1 • Display: "SWR HF/50M"
• Connect the 100
Ω
dummy load to
[ANT1].
2 • Display: "SWR 70M"
The Transmit adjustment menu is displayed.
1) Set or modify the adjustment value as specifi ed by rotating [MAIN DIAL].
2) Push [SET] to store the value.
*; Stop transmitting.