Icom IC-455 Скачать руководство пользователя страница 2

Страница: 2 / 48

■

Important

READ ALL INSTRUCTIONS

carefully and

completely before using the transceiver.

SAVE THIS INSTRUCTION MANUAL

—

This instruction manual contains important

operating instructions for the IC-455.

This instruction manual includes some

functions that are usable only when they

are preset by your dealer. Ask your dealer

for details.

■

Features

Output power of 5 W (High) and

1 W (Low)

A maximum of 256 channels

A wide RX frequency range

(400.0000 ~ 520.0000 MHz)

Scanning a maximum of 80 Tag

channels in approximately 1 second.

The Noise Reduction and Equalizer

functions that can make the audio easy

to hear. (p. 29)

The Auto Volume function that can

automatically adjust the volume level of

the received audio, depending on your

operating environment. (pp. 24, 29)

The Scrambler function (pp. 24, 29)

Selectable backlight colour of the

function display (p. 30)

A built-in DC to DC converter provides

12 V and 24 V automatic switching.

The HM-244 supplied microphone with

2 W of loud audio

Thank you for choosing this Icom product. This product was designed and built with

Icom’s state of the art technology and craftsmanship. With proper care, this product

should provide you with years of trouble-free operation.

Icom is not responsible for the

destruction, damage to, or performance

of any Icom or non-Icom equipment, if the

malfunction is because of:

•Force majeure, including, but not

limited to, fires, earthquakes, storms,

floods, lightning, other natural disasters,

disturbances, riots, war, or radioactive

contamination.

•The use of Icom transceivers with any

equipment that is not manufactured or

approved by Icom.

Icom, Icom Inc. and the Icom logo are

registered trademarks of Icom Incorporated

(Japan) in Japan, the United States, the

United Kingdom, Germany, France, Spain,

Russia, Australia, New Zealand, and/or

other countries.

All other products or brands are registered

trademarks or trademarks of their

respective holders.

■

Explicit definitions

WORD

DEFINITION

DANGER!

Personal death, serious

injury or an explosion may

occur.

WARNING!

Personal injury, fire hazard

or electric shock may

occur.

CAUTION

Equipment damage may

occur.

NOTE

If disregarded,

inconvenience only. No risk

of personal injury, fire or

electric shock.

Содержание IC-455

















































Результаты поиска

Содержание IC-455

Отзывы:

Похожие инструкции для IC-455

Бренды по названию

Популярные бренды

Icom IC-455, Инструкция по эксплуатации

Результаты поиска

Содержание IC-455

Отзывы:

Похожие инструкции для IC-455

Бренды по названию

Популярные бренды