background image

5

SCAN

5-3

 

D

Group scan/Priority scan

1) Start the scan.

  ➥

 Push [SCAN].

   

•   “ ” blinks.

    •  When receiving a signal, the scan pauses and then 

resumes according to the Scan Stop Timer setting.

2) Stop the scan.

  ➥

 Push [SCAN].

 

D

Repeater scan

1) Start the scan.

  ➥

 Push [SCAN].

   

•   “ ” blinks.

    •   When a signal is received on a repeater channel, the 

scan stops.

    •  3 high beeps sound when a signal is received while 

the transceiver trying to access the repeater.

    •  3 low beeps sound when no signal is received while 

the transceiver trying to access the repeater.

2) Stop the scan.

  ➥

 Push [SCAN].

NOTE for Priority scan:

Set the priority channel before scanning.

1) Selecting the desired channel.

  ➥

 Push [UP]/[DOWN].

2) Turn ON the Function mode.

  ➥

 Push [FUNC].

   

•   “ ” is displayed.

3) Set the priority channel.

  ➥

 Hold down [DUP] for 2 seconds.

Scanning

The IC-410PRO scans all tagged channels when a 

scan is activated. When it detects a busy channel, the 

scan can be set to pause, or to resume after a pause. 

(Except for a Repeater scan).

See page 3-4 for details on the Scan Restart function.

1. Selecting a Scan mode

1) Enter the Set mode.

  ➥

 Hold down [FUNC] for 2 seconds.

2) Select “SCAN-M” menu.

  ➥

  Push [FUNC] until the “SCAN-M” menu is 

displayed.

3) Select a Scan mode.

  ➥

   Push  [UP]/[DOWN].

4)

 

Exit the Set mode.

  ➥

 Hold down [FUNC] for 2 seconds.

2. Setting a Tag channel

NOTE:

 All channels for each scan type are tagged 

by default. To select the channels to scan, you must 

first untag the undesired channels.

1) Select an undesired channel.

  ➥

 Push [UP]/[DOWN].

2) Untag the selected channel.

  ➥

 Hold down [SCAN] for 2 seconds.

    • “ ” disappears when the tag setting is OFF.

3)  Repeat step 1) and 2) until all the undesired 

channels are untagged.

To tag

1) Select the untagged channel.

  ➥

 Push [UP]/[DOWN].

2) Tag the selected channel.

  ➥

 Hold down [SCAN] for 2 seconds.

   

•   “ ” is displayed when the selected channel is 

tagged.

3. Setting the Scan Stop Timer

Set the Scan Stop Timer in the Set mode.

See page 3-4 for details.

 

D

Open scan

1) Start the scan.

  ➥

 Push [SCAN].

   

•   “ ” blinks.

    •  When receiving a signal, the scan pauses and then 

resumes according to the Scan Stop Timer setting.

2) Stop the scan.

  ➥

 Push [SCAN].

Содержание IC-410PRO

































Отзывы: