Icom IC-3FGX, Инструкция по эксплуатации

Страница: 24 / 32

21
8
CLONING
‘ ‘
Cloning
Cloning allows you to quickly and easily transfer the programmed
contents from one transceiver to another transceiver; or data from
PC to a transceiver using the optional CS-3FGX
CLONING SOFT-
WARE.
D D
Transceiver-to-transceiver cloning
q
Connect the optional OPC-474 CLONING CABLE with adapter
plugs to the [SP] jack of the master and slave transceivers.
• The master transceiver is used to send data to the slave trans-
ceiver.
w
While pushing [P0] and [
Y Y
], turn the transceiver’s power on to
enter cloning mode (For both the master transceiver and slave
transceiver).
•
“CLONE” appears and the transceiver enters the clone standby
condition.
e
Push [PTT] on the master transceiver.
•
“CLOUT” appears in the master transceiver’s display.
•
“CL IN” appears automatically in the slave transceiver’s display.
•
When cloning is finished, “CLONE” appears in the master trans-
ceiver’s display.
NOTE: DO NOT push the [PTT] on the slave transceiver during
cloning. This will cause a cloning error.
r
When cloning is finished, turn power off, then on again to return
to normal operation.
D D
PC-to-transceiver cloning
Please refer to the HELP file that comes with the CS-3FGX
CLONING SOFTWARE.
CAUTION: Imprudent cloning operation causes a cloning error.
In such a case, memory contents may be lost. Cloning must
then be repeated.
IC- 3FGX 03.12.8 14:20 Page 24 (1,1)