Icom IC-3FGX, Инструкция по эксплуатации

Страница: 19 / 32

16
5
CONVENTIONAL OPERATION
‘ ‘
Receiving and transmitting
NOTE: Transmitting without an antenna may damage the trans-
ceiver. See p.1 for antenna attachment.
Turn power ON as described on p. 1.
Receiving:
q
Push [
Y Y
]/[
Z Z
] to select a channel.
w
Listen for a transmission and adjust [VOL] to a comfortable lis-
tening level.
• When no transmission is heard, push and hold monitor while
adjusting [VOL] (your transceiver may not be programmed with
the monitor function).
The transceiver is now set to receive desired calls on the selected
channel.
Transmitting:
Wait for the channel to become clear to avoid interference.
e
While pushing and holding [PTT], speak into the microphone at a
normal voice level.
• When a tone signalling system is used, the call procedure de-
scribed at right may be necessary.
r
Release [PTT] to return to receive.
IMPORTANT: To maximize the readability of your transmitted sig-
nal, pause a few sec.. after pushing [PTT], hold the microphone 10
to 15 cm from your mouth and speak at a normal voice level.
IC- 3FGX 03.12.8 14:20 Page 19 (1,1)