background image

New2001

ii

R

 

DANGER HIGH VOLTAGE! NEVER

 touch an antenna con-

nector during transmission. This may result in an electrical shock 
or burn.

R

 

WARNING RF EXPOSURE!

 This transceiver emits Radio Fre-

quency (RF) energy. Extreme caution should be observed when 
operating this transceiver. If you have any questions regarding 
RF exposure and safety standards please refer to the Federal 
Communications Commission Office of Engineering and Tech-
nology’s report on Evaluating Compliance with FCC Guidelines 
for Human Radio Frequency Electromagnetic Fields (OET Bul-
letin 65).

R

 

WARNING! NEVER

 operate the transceiver while driving a 

vehicle. Safe driving requires your full attention—anything less 
may result in an accident.

R

 

WARNING! NEVER

 operate the transceiver with an earphone 

or other audio accessories at high volume levels. Continuous high 
volume operation may cause a ringing in your ears. If you experi-
ence ringing, reduce the volume level or discontinue use.

R

 

WARNING! NEVER

 connect the transceiver to an AC outlet. 

This may pose a fire hazard or result in an electric shock.

R

 

WARNING! NEVER

 connect the transceiver to a power source 

of more than 16 V DC such as a 24 V DC. This could cause a fire 
or damage the transceiver.

R

 

WARNING! NEVER

 reverse the DC power cable polar-

ity when connecting to a power source. This could damage the 
transceiver.

R

 

WARNING! NEVER

 operate the transceiver during a lightning 

storm. It may result in an electric shock, cause a fire or damage 
the transceiver. Always disconnect the power souce and antenna 
before a storm.

R

 

WARNING! NEVER

 cut the DC power cable between the DC 

plug and fuse holder. If an incorrect connection is made after cut-
ting, the transceiver may be damaged.

R

 

WARNING! NEVER

 let metal, wire or other objects touch any 

internal part or connectors on the rear panel of the transceiver. 
This may result in an electric shock or this could cause a fire or 
damage the transceiver.

R

 

WARNING! NEVER

 operate or touch the transceiver with wet 

hands. This may result in an electric shock or may damage the 
transceiver.

R

 

WARNING!

 Immediately turn OFF the transceiver power and 

remove the power cable if it emits an abnormal odor, sound or 
smoke. Contact your Icom dealer or distributor for advice.

CAUTION: NEVER

 expose the transceiver to rain, snow or any liquids.

CAUTION: NEVER

 change the internal settings of the transceiv-

er. This may reduce transceiver performance and/or damage to 
the transceiver.

CAUTION: NEVER

 place the transceiver where normal opera-

tion of the vehicle may be hindered or where it could cause bodily 
injury.

DO NOT 

operate the transceiver near unshielded electrical 

blast-

ing caps or in an explosive atmosphere.

PRECAUTIONS

Содержание ic-2730A











Отзывы: