64
11
OTHER FUNCTIONS
New2001
11
■
AM/FM narrow mode
[
The IC-2720H has AM mode reception for both the left and
right bands, and FM narrow mode is available for the left
band. Typically, AM mode is used for the air band
(118–135.995 MHz).
The FM narrow mode selection is available for the USA ver-
sion’s left band only.
q
Select the desired frequency band in VFO mode, or the de-
sired memory channel on the left or right band as desired.
• If you want to select FM narrow mode, select the desired fre-
quency band or memory channel on the left band.
w
Push [SET•
] to enter set mode.
e
Push [SET•
] or [LOW•PRIO] to select “nAr” item or
“COn” item.
• Select “nAr” for Wide/Narrow setting.
• Select “COn” for operating mode setting.
r
Rotate the same band’s [DIAL] to select FM narrow or AM
as desired.
• “AM” appears when AM mode is selected.
t
Push [TONE•DTMF] to exit set mode.
z
Push [BAND] to select the desired band (left or
right) as the main band.
• If you want to select FM narrow mode, select the de-
sired frequency band or memory channel on the left
band.
x
Set the desired frequency or memory channel.
c
Push [
SET
B(D-OFF)] to enter set mode.
v
Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] to select
“nAr” item or “COn” item.
• Select “nAr” for Wide/Narrow setting.
• Select “COn” for operating mode setting.
b
Push [
Y
]/[
Z
] to select FM narrow or AM as de-
sired.
n
Push [
CLR
A(MW)] to exit set mode.
SET
B
MAIN
T X
M
MAIN
T X
M
• Wide/Narrow setting
• Operating mode setting
IC-2720H_2.qxd 03.5.13 9:45 Page 64 (1,1)
