37
5
MEMORY OPERATION
New2001
■
Transferring bank contents
Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION:
Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q
Select the desired bank contents to be transferred or
erased in the desired band (left or right).
➥
Push the desired band’s [M/CALL•MW] several times to
select memory mode.
➥
Push the same band’s [MAIN•BAND] for 1 sec. then ro-
tate the same band’s [DIAL] to select the desired mem-
ory bank.
• Bank initial blinks.
➥
Push the [MAIN•BAND] to select the bank then rotate
the [DIAL] to select the desired contents.
• Bank initial stops blinking.
w
Push the [M/CALL•MW] for 1 sec.
• Bank initial blinks.
e
Rotate the [DIAL] to select the desired bank initial to trans-
fer or erase.
• Select “– –” indication when erasing the contents from the bank.
r
Push the [M/CALL•MW] again.
• Bank initial or “– –” indication stops blinking.
t
Push the [MAIN•BAND] for 1 sec. then push the
[MAIN•BAND] momentarily again to return to regular mem-
ory condition.
y
Repeat steps
q
to
t
for transferring or erasing an an-
other banks contents.
z
Select the desired bank contents in the main
band.
➥
Push [MR/CALL] to select memory mode.
➥
Push [FUNC], [
MONI
1(BANK)] then select
the desired memory bank via [
Y
]/[
Z
].
➥
Push [
CLR
A(MW)] to select the bank then
select the desired contents via [
Y
]/[
Z
].
x
Push [FUNC] then [
CLR
A(MW)].
• Bank initial blinks.
c
Push [
Y
]/[
Z
] to select the desired bank initial to
transfer or erase.
• Select “– –” indication when erasing the contents
from the bank.
v
Push [
CLR
A(MW)].
• Bank initial or “– –” indication stops blinking.
b
Push [FUNC], [
MONI
1(BANK)] then [
CLR
A(MW)]
to return to regular memory condition.
n
Repeat steps
z
to
b
for transferring or eras-
ing an another banks contents.
BANK
[
Y
]/[
Z
]
MW
MAIN
T X
M
IC-2720H_2.qxd 03.5.13 9:45 Page 37 (1,1)
