2
INSTALLATION
11
■
Microphone connection
The microphone connector is located behind the front panel.
Connect the supplied microphone as follows:
➀
Slide the supplied microphone cable connector (and at-
tached microphone) into the microphone jack on the main
body of the transceiver until it clicks into place.
➁
To remove the microphone, push the release lever on the
bottom of the microphone cable connector.
■
Separate installation
Using an optional OPC-600/601
SEPARATION CABLE
, the front
panel can be separated from the main body, doubling as a re-
mote controller.
➀
Detach the front panel as
at right.
➁
Connect a separation
cable between the front
panel and main body
using the supplied screws
as illustrated below.
Connect microphone
here
Rear of front panel
Main body
OPC-600 or OPC-601
➀
8 V OUT
➁
Freq. up/down
➂
8 V control IN
➃
PTT
➄
Mic AF (–)
➅
Mic AF (+)
➆
Ground
➇
Data IN
➇
➀
Microphone pin assignments