Icom i746PRO, Инструкция по эксплуатации

Страница: 45 / 116

32
4
RECEIVE AND TRANSMIT
2001 NEW
D D
Contest number set mode
This menu is used to set the contest (serial) number
and count up trigger, etc.
• Setting contents
q
Push [MENU] to select M1 , then push [F4 KEY ] to
select the memory keyer menu.
w
Push [F4 001 ] to enter the contest number set
mode.
e
Push [F1
≤
] or [F2
≥
] to select the desired set item.
r
Set the desired condition using the tuning dial.
• Push [F3] for 1 sec. to select a default condition or value.
t
Push [MENU] 2 times to return to M1 .
F 1 F 2 F 3 F 4 F 5
1
Set item up/down
5 O %
S i d e T o n e L e v e l
2. Count Up Trig
This selects which of the four memory slots will have
the contest serial number exchange. The count up
trigger allows the serial number to e automatically in-
cremented after each complete serial number ex-
change is sent.
• M1, M2, M3 and M4 can be set. (default: M2)
M 2 2
C o u n t U p T r i g
1. Number Style
This item sets the numbering system used for contact
(serial) numbers— normal or morse cut numbers.
• Normal : Does not use morse cut number
(default)
• 190 ANO : Sets 1 as A, 9 as N and 0 as O.
• 190 ANT : Sets 1 as A, 9 as N and 0 as T.
• 90 NO : Sets 9 as N and 0 as O.
• 90 NT : Sets 9 as N and 0 as T.
N o r m a l 1
N u m b e r S t y l e
3. Present Number
This item shows the current number for the count up
trigger channel set above.
• Rotate the tuning dial to change the number, or push
[F3 CLR ] for 1 sec. to reset the current number to 001.
C L R 0 0 1 3
P r e s e n t N u m b e r
IC-746PRO.qxd 02.4.2 11:31 Page 32