64
9
INSTALLATION AND CONNECTIONS
New2001
9
INST
ALLA
TION AND CONNECTIONS
New2001
■
Connecting to a DC power
supply
Connect to a 13.8 V DC power source with at least 15 A ca-
pacity.
Connect the black DC power cable to the (–) Negative termi-
nal, and the red DC power cable to the (+) Positive terminal.
R
WARNING! NEVER
remove the fuse holders from the
DC power cable.
• CONNECTING TO A DC POWER SUPPLY
⊕
−
Main unit
to an
AC outlet
DC power
supply 13.8 V
Fuses
15 A
−
⊕
Red
Black
See page 69 for a car battery connection.
■
Installing the controller
D
When installing into your vehicle
You can install the controller on the dashboard or the console
of your vehicle with the optional MBA-5
controller
bracket
and the MBF-1
mounting
base
. (p. 66)
Attach the MBF-1 on the dashboard or the console.
q
• See the MBF-1 instruction manual for details.
MBF-1
Suction pad
Base lever
Attach the MBA-5 to the controller
w
’s rear panel with the two
supplied screws as shown below.
Magnet
Controller
bracket
Screw
(M2.6×8)
MBA-5