63
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
q
When a Position Request call is
received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
•
“ ” is displayed and “ ” blinks.
w
Push any [Alarm Off]
.
e
Select your desired action.
D
Receiving a Position Request Call
[Hold]:
Holds the RX call task, and return to
the previous screen.
[ACK (Unable)]:
Sends an acknowledgment with no
position and time data.
[ACK (Able)]:
Sends an acknowledgment with
position and time data.
[Accept]:
Enters the DSC Task mode.
DSC Task mode
•
Rotate [CH/ENT] to view the call
contents.
• See page 28 for details of the Task
mode's software key functions.
r
Push [Standby Mode]
to return
to the Main screen.
NOTE:
When “Position ACK” is set to
“Auto,” the transceiver automatically
replies to the call. Both the TX and RX
calls are stored in the Transmitted and
Received Call Logs. (Default: Manual)
[Pause]: Pauses the countdown.
• To restart the countdown,
push [Resume]
.
[Accept]: Enters the DSC Task mode.
DSC Task mode
• Monitor the channel specified by the
calling station for an announcement
from the calling station.
(Example: Channel 16)
•
Rotate [CH/ENT] to view the call
contents.
• See page 28 for details of the Task
mode's software key functions.
r
Push [Standby Mode]
to return
to the Main screen.
TIP:
See page 48 for details of
sending an acknowledgement.