6
MENU SCREEN
6-16
Man down Angle
(For the Portable types)
Sets the Emergency mode detection angle for the
Man Down function. If the transceiver leans past the
set angle for the ON Timer time period, the transceiver
enters the Emergency mode, and then a countdown
starts.
•Options: 45, 60, or 75 degrees
Motion Sense
(For the Portable types)
Sets the acceleration sensor sensitivity to detect
whether the user is moving or not, for the Motion
Detection function. This setting is for the Motion
Detection function, and it determines the acceleration
threshold level to activate the Motion Detection Timer.
•Range: 1 (high sensitivity) ~ 10 (low sensitivity).
L
If you set a lower level, the transceiver will enter the
Emergency mode more easily.
Stationary Sense
(For the Portable types)
Sets the acceleration sensor sensitivity to detect if the
user is stationary or not for the Stationary Detection
function. This setting is used for the Stationary
Detection function, and it determines the acceleration
threshold level to activate the Stationary Detection’s
ON Timer (Sec).
•Range: 1 (high sensitivity) ~ 10 (low sensitivity).
L
If you set at a higher level, the transceiver will enter the
Emergency mode more easily.
Desk Work
Key Operation Walking (slow) Walking (fast)
Running
Sensitivity Level
9
10
1
3
5
6
7
8
4
2
For Stationary
Sensitivity
For Motion Sensitivit
y
• Sensitivity example
Sensor
Backlight
Sets the Key Backlight status.
For the Portable types
•OFF: Turns the display backlight continuously OFF.
•Auto: When any key except [PTT] is pushed, the
backlight lights for 5 seconds.
•ON: Turns the backlight continuously ON.
For the Mobile types
•OFF: Turns the display backlight continuously OFF.
•Auto: Turns the backlight continuously ON with the
Brightness setting level.
When the Dimmer terminal of the D-Sub 25 pin
or Option Connector 22 pin is activated, the
backlight lights dimly with the Dimmer setting
level.
•ON: Turns the backlight continuously ON with the
Brightness setting level.
Dimmer
Sets the LCD dimmer level.
•Range: 0 (the lowest) ~ 7 (the highest)
NOTE:
It is recommended to be the Dimmer level
lower than the Brightness level.
Brightness
Sets the LCD brightness level.
•Range: 0 (the lowest) ~ 7 (the highest)
LCD Color Test
Checks whether or not the LCD displays color
correctly.
LCD Mode
Sets the LCD Mode.
•Day: The LCD is set to the Day mode.
The Day mode is for daytime operation, and
the display backlight color is set to white.
•Night: The LCD is set to the Night mode.
The Night mode is for nighttime operation,
and the display backlight color is set to black.
Display
Previous view
