background image

7

NXDN™ OPERATION

7-10

Transmitting a call (Continued)

 

D

Transmitting a Call Alert call

A Call Alert call enables you to notify another user 

who may be away from the transceiver that you want 

to talk.

<Menu operation>

Portable: 

 For the Ten-key and the Simple key types

Mobile:  

For the LCD types

(Menu > Signaling/Call > 

Call Menu

)

1.  Push [Menu] to display the Menu screen.

2.   Push [Left] or [Right] to select “Signaling/Call,” 

then push [OK].

  

3.   Push [Up] or [Down] to select “Call Menu,” then 

push [OK].

  

4.   Push [Up] or [Down] to select the Individual or 

Group ID, then push [OK].

  

5.   Push [Up] or [Down] to select “Call Alert,” then 

push [PTT] to transmit the Call Alert call.

  

L

 “Success” is displayed after receiving an 

acknowledgement from the target station.

L

 “Failed” is displayed if the target station does not 

send back an acknowledgement.

<Key operation>

Portable: 

 For all types

Mobile:  

For all types

Using [Call Alert]:

 Hold down [Call Alert] to transmit the Call Alert call.

L

 “Success” is displayed after receiving an 

acknowledgement from the target station.

L

 “Failed” is displayed if the target station does not send 

back an acknowledgement.

Previous view

Содержание F3400D 21























































































































































































Отзывы: