Icom F3400D 21 Скачать руководство пользователя страница 28

Страница: 28 / 182

PANEL DESCRIPTION

2-20

Category: Audio Setting
TX Noise Cancel

Push to select the TX Noise Cancel level between 1

and 3 to suppress the microphone input noise to make

the audio easy to hear.

When “OFF” is selected, the microphone input noise is

not suppressed.

RX Noise Cancel

Push to select the RX Noise Cancel level between 1

and 3 to suppress the receive audio noise to make the

audio easy to hear.

When “OFF” is selected, the receive audio noise is not

suppressed.

Category: Bluetooth
Bluetooth

Push to turn the Bluetooth

function ON or OFF.

Waiting Pairing

Push to enter the Pairing Request Wait mode.

• The transceiver waits for a pairing request from a

Bluetooth

device.

Category: Vibration
Vibration

(For the Portable type transceivers)

Push to turn the Vibration function ON or OFF.

When “ON” is selected, the transceiver vibrates when a

matching call or ID is received.

Category: Display
Backlight

Push to select the Backlight level.

(For the Portable type transceivers)

•OFF: The backlight is continuously OFF.

•ON: Turns the backlight is continuously ON.

•Auto: When any switch except [PTT] is pushed, the

backlight lights for 5 seconds.

(For the Mobile type transceivers)

•OFF: The backlight is continuously OFF.

•ON: Turns the backlight is continuously ON.

•Auto: Turns the backlight continuously ON with the

Brightness setting level.

When the Dimmer terminal of the D-Sub 25

pin or Option Connector 22 pin is activated,

the backlight lights dimly.

Brightness

Push to open the “Brightness” window. Then, push

[Up] or [Down] to select the desired level between 0

(the lowest) and 7 (the highest).

Dimmer

Push to open the “Dimmer” window. Then, push [Up]

or [Down] to select the desired level between 0 (the

lowest) and 7 (the highest).

NOTE:

It is recommended to be the Dimmer level

lower than the Brightness level.

LCD Mode

Push to select the LCD Mode.

•Day : The LCD is set to the Day mode.

The Day mode is for the daytime operation,

and the display backlight color is set to

white.

•Night : The LCD is set to the Night mode.

The Night mode is for the nighttime

operation, and the display backlight color is

set to black.

Assignable Software key functions

For keys and keypads (Continued)

Previous view

Содержание F3400D 21























































































































































































Результаты поиска

Содержание F3400D 21

Отзывы:

Бренды по названию

Популярные бренды

Icom F3400D 21, Руководство по эксплуатации

Результаты поиска

Содержание F3400D 21

Отзывы:

Бренды по названию

Популярные бренды