Icom D-STAR ID-31A; D-STAR ID-31E Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 80

background image

New2001

11

New2001

BATTERY CHARGING

4

■

Caution

•

R

DANGER!

NEVER

short the terminals (or charging termi-

nals) of the battery pack. Also, current may flow into nearby
metal objects such as a key, so be careful when placing
battery packs (or the transceiver) in bags, etc.

Simply carrying with or placing near metal objects such as

a necklace, etc. may cause shorting. This may damage not
only the battery pack, but also the transceiver.

•

R

DANGER!

Use and charge only specified Icom battery

packs with Icom radios or Icom chargers. Only Icom battery
packs are tested and approved for use with Icom radios or
charged with Icom chargers. Using third-party or counterfeit
battery packs may cause smoke, fire, or cause the battery
to burst.

D

Battery caution

•

R

DANGER! DO NOT

hammer or otherwise impact the bat-

tery. Do not use the battery if it has been severely impacted
or dropped, or if the battery has been subjected to heavy
pressure. Battery damage may not be visible on the outside
of the case. Even if the surface of the battery does not show
cracks or any other damage, the cells inside the battery may
rupture or catch fire.

•

R

DANGER! NEVER

use or leave battery pack in areas

with temperatures above +60˚C (+140˚F). High tempera-
ture buildup in the battery, such as could occur near fires
or stoves, inside a sun heated car, or in direct sunlight may

cause the battery to rupture or catch fire. Excessive tem

-

peratures may also degrade battery performance or shorten
battery life.

•

R

DANGER! DO NOT

expose the battery to rain, snow,

seawater, or any other liquids. Do not charge or use a wet
battery. If the battery gets wet, be sure to wipe it dry before
using.

•

R

DANGER! NEVER

incinerate a used battery pack since

internal battery gas may cause it to rupture, or may cause

an explosion.

•

R

DANGER! NEVER

solder the battery terminals, or

NEVER

modify the battery pack. This may cause heat gen-

eration, and the battery may burst, emit smoke or catch fire.

•

R

DANGER!

Use the battery only with the transceiver for

which it is specified. Never use a battery with any other
equipment, or for any purpose that is not specified in this
instruction manual.

•

R

DANGER!

If fluid from inside the battery gets in your

eyes, blindness can result. Rinse your eyes with clean water,
without rubbing them, and see a doctor immediately.

Misuse of Lithium-ion batteries may result in the following
hazards: smoke, fire, or the battery may rupture. Misuse
can also cause damage to the battery or degradation of
battery performance.

New2001

«
...
18
19
20
21
22
...
»

Содержание D-STAR ID-31A; D-STAR ID-31E

















































































Отзывы:

Нет отзывов

Похожие инструкции для D-STAR ID-31A; D-STAR ID-31E

Бренд: Zibro Страницы: 16

Бренд: LVI Страницы: 42

Бренд: UNITED Страницы: 8

Бренд: Radiatori 2000 Страницы: 20

Бренд: Micro Detectors Страницы: 8

EUROSTOVE SRE 301 -

Бренд: Eurostove Страницы: 2

Бренд: ALURAD Страницы: 2

Бренд: Claudgen Страницы: 6

Pulsar APB/0416

Бренд: Herschel Страницы: 3

Бренд: Sundirect Страницы: 20

Бренд: Aqua-Hot Страницы: 55

Бренд: Zibro Страницы: 103

Бренд: Sonnenkonig Страницы: 72

Бренд: Draper Страницы: 20

Бренд: STIEBEL ELTRON Страницы: 60

Бренд: RealFlame Страницы: 36

Бренд: Redutelco Страницы: 10

Бренд: RedCore Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды