REFERENCE INFORMATION
14
74
14-4 Basic Setting Example
This section presents some of the setting values
entered when the AP-3 unit is used in the network
configuration illustrated below.
For setting items not shown here, enter values that
are appropriate for the particular network configura-
tion.
[DR-1 WL:
Required Settings]
• Use DHCP server
function.
• DR-1WL IP address:
192.168.0.1
Internet
Wireless terminal
Wired terminal
SL-1100
SL-1100
AP-3
DR-1WL
■
Using the same subnet for both the wired and wireless LAN
[AP-3:
Required Settings]
• Use DHCP server
function.
• AP-3 IP address:
192.168.0.2
• Initial allocation IP
address: 192.168.0.50
• Do not use routing
mode.
[Setting Tips]
Only change the values in
the "Wired LAN" column of
the [DHCP Server Settings]
screen.
Set the initial allocation IP
address so that the range of
IP addresses over which the
AP-3 can allocate does not
overlap the range of IP
addresses over which the
DR-1WL (router) can allo-
cate.
Set the [Default Gateway]
and the [Primary DNS
Server] to the same value as
the IP address of the DR-
1WL.
Although the [RIP Setting]
does not have a direct influ-
ence on the performance of
the network, unnecessary
traffic can be avoided by not
using RIP.
[AP-3 Network Settings] screen
[Routing Setting] screen
* The wired terminal will obtain an IP address from either
the DR-1WL or the AP-3.
* The wireless terminal will obtain an IP address from the
AP-3.
