24
UniNet
3232 W. El Segundo Blvd., Hawthorne, California 90250 | [email protected]
www.icolorprint.com
4)
Change all settings to match the following for Media Setup. The MPTray setting is the most important
setting. The Media Type and Media Weight can be set to your most common settings, but the RIP will
over ride:
5)
With these settings in place, you will be able to print to the MPTray without pressing the online button
at all (even for the first page out, it prints completely unattended). When using the printer without the
iColor® TransferRIP, the printer will now always look for paper in the MPT first. If it does not find it
there it will pull from the tray on bottom so this setting works great for all uses.
6)
When using the iColor® TransferRIP, you should not check the ‘Force Manual Tray’ box and the input
tray should be set to ‘Printer Default’.
If you are not networking your printer, the following instructions are for printers that have been set up via
direct connection using the USB port:
