ICOD T58Z Скачать руководство пользователя

Страница: 9 / 28

supply, putting the paper carrier button away less than 5 seconds, the printer
moves to self-test pattern, and print self-test list.

□ Hex printing method: Installed the paper, and pressed the paper carrier button

and turned on the power supply, About 5 seconds, “No Paper” light is bright,
this time loosen the button, Print according to the information of hex printing
method and print the data which received by interface according to hex printing
method.

□ Opening cover spanner: as the picture 2-2.2.

Opening cover spanner

Figure2-2.2 Opening cover spanner

2.4

2.4 Installing

Installing

Installing paper

paper

The steps of installing thermal paper:

□ Open the cover through pulling spanner as the picture 2-3.1.
□ Install the roller paper into the paper storage as the picture direction,

then pulling a part of paper along the paper storage, and put flat on the
print head as the picture 2-3.2.

□ Put the cover down, and close the cover lightly as the picture 2-3.2; Restore

to the primary position, then, install the printing paper as the picture
2-3.4.

Picture 2-3.1 Open the cover

Picture 2-3.2 Install the paper

Содержание T58Z





























Результаты поиска

Содержание T58Z

Отзывы:

Похожие инструкции для T58Z

Бренды по названию

Популярные бренды

ICOD T58Z, Руководство пользователя

Результаты поиска

Содержание T58Z

Отзывы:

Похожие инструкции для T58Z

Бренды по названию

Популярные бренды