ICOD T58Z, Руководство пользователя

Страница: 22 / 28

22
□ Default value is n=50
□ Relevant command: GS K
○ ○ ○ ○
1
1
1 1 GS GS GS GS k k k k m m m m d1......dk d1......dk d1......dk d1......dk NUL NUL NUL NUL
○
○ ○
○
2 2 2 2 GS GS GS GS k k k k m m m m n n n n d1......dn d1......dn d1......dn d1......dn
Print
Print
Print Print bar
bar
bar bar code
code
code code
Form
①ASCII code: GS k m
d1......dk NUL
HEX: 1D 6B m d1......dk 00
DECIMAL: 29 107 m d1.......dk 0
②ASCII code: GS k m n d1......dn
HEX: 1D 6B m n d1......dn
DECIMAL: 29 107 m n d1......dn
Description
□
Choose bar code system and print bar code:
① 4≤m≤5 (k and d decided by using bar code system)
② m=73 (n and d decided by using bar code system)
□
m set the bar code system as follows:
M Bar code
system
Character units Notes
①
4 CODE39 1
≤K
48
≤d≤57, 65≤d≤
90,32,36,37,43,45,46,47
5 ITF 1
≤K(k is even)
48
≤d≤57
②
73 CODE128
1≤n≤255
0
≤d≤127
【
Note Note Note Note
①】
·This orders finished by NUL code.
·The units of ITF bar code data must be even. When inputting odd units
data, the printer will be neglected the last one which received.
【
Note Note Note Note
②】
·
n designates bar code data byte counts, and the printer will take n byte date and
deal with as the bar code data from the next character.
·
If n exceeds the designated scale, then the printer stop dealing with this orders,
and treat continued data as the general data.
·
This orders feed paper according to the requirement of printing bar code, no
consider the line spacing which set by ESC 2 or ESC 3.
·
This orders only effects that there are no data in the printing line buffer area.
When there are data in the printing line buffer area, the printer will treat
continued data as the general data.
·
After printing bar code, this orders set the printing position at the beginning of a
line.
·
This orders no effected by printing pattern(the size of character and so on),
except reverse printing pattern.