LIST OF MATERIALS
Product Component
Material
Bottle
Aluminum
Device Headset
ABS Plastic
Head Gasket and Straw
Silicon
Charger Gasket
Silicon
Charger Holder
ABS Plastic
To order spare parts, please visit us online at
www.icotrading.co.uk
INSTRUCTION
MANUAL FOR ICO011 1L ALUMINIUM
SODA
SIPHON
INSTRUCTIONS FOR USE
efore using your soda siphon for the first time,
disassemble the device and fully clean the unit as
per the cleaning instructions in this manual.
Prior to Filling
1.
Rinse the bottle with warm water (max.
50°C/122°F) before each use
2.
Push the lever several times to check the siphon’s
function
Filling
3.
Using a measuring cup, fill the soda siphon with
cold water. Do not fill over 1 litre/1 quart. Overfill-
ing the device will cause it to function incorrectly.
Do not fill your soda siphon with anything other
than cold water, and do not add any extra
ingredients or flavours. The colder the water, the
more carbonation will occur.
Charging
4.
Insert the tube and gasket into the headset.
5.
Firmly screw the headset onto the bottle of your
soda siphon.
6.
Insert 1 ICO soda charger (8g Co2 only, do not use
N2O) into the charger holder.
7.
Screw the charger holder with the inserted soda
charger onto the headset until you hear all the
gas has entered the siphon (“hssst!”).
Warning:
the siphon is now pressurized! Do not
heat or drop the siphon when pressurized. If
you drop the pressurized siphon, it may be
damaged and dangerous to use. Please
contact ICO if this occurs.
8.
Shake the siphon vigorously at least 5 times.
9.
Unscrew the charger holder and recycle the
empty soda charger. A slight hiss might be heard
when removing the charger holder: this is normal.
Warning:
NEVER use more than one 8g Co2
charger at a time.
Warning:
DO NOT use the device with the
charger holder still attached to the dispenser.
The charger holder and the empty charger
must be removed from the dispenser before it
can be used.
2
