Operation
10.
Gently press the lever to dispense the soda
water. Direct the stream toward the internal
wall of the drinking glass to avoid excess fizz at
the top of the glass.
Note:
If necessary, you can shake the device again in
between each glass of water dispensed. This will
help the gas remain evenly distributed.
Note:
Store your pressurized soda siphon in the
fridge when it’s not actively in use.
CLEANING AND STORAGE
General
●
Push down on the lever until the soda siphon is
completely empty and there is no pressure left.
Unscrew the head from the siphon.
●
Remove the headset and attached straw from
the bottle.
●
Rinse the siphon’s components with clear potable
water (max. 50°C /122°F) only.
NOTE:
Never use scouring agents, abrasive
sponges/brushes, or sharp objects to clean the
siphon. This will void your warranty and likely
damage the siphon.
NOTE:
Do not put your soda siphon in the dishwasher
and do not wash in boiling water.
Service
●
Spare parts can be purchased individually from
www.icotrading.com
●
If you think there is something wrong with your
siphon, please contact us so we can check the
device’s operation.
Storage
●
If your ICO Soda Siphon is not going to be filled
again immediately, leave the components to air
dry in a clean place and store it in a dismantled
condition without the head screwed on. Rinse the
device thoroughly before using again.
Troubleshooting
To release the pressure in your soda siphon
Place the siphon upright in a sink and gently push
down on the lever until the pressure is gone from the
siphon (there is no gas or water leaving the device).
Now the head can be safely removed from the
bottle. If the pressure will not release, please contact
us at
www.icotrading.co.uk.
Soda charger will not puncture
1.
The charger being used is not suitable: we recom-
mend only using ICO brand 8g Co2 chargers.
2.
The charger was inserted backwards: flip the
charger around and attempt to puncture the
charger again.
3.
The puncturing unit has been damaged or is
clogged: contact us at www.icotrading.co.uk to
arrange a service.
Water does not carbonate (remains still)
1.
The siphon was not shaken enough: shake the
siphon vigorously several times (at least 5 times)
before attempting to dispense.
2.
The water is not cold enough: The colder the
water, the more Co2 it can absorb. For the best
results we recommend keeping your filled soda
siphon in your fridge when not in use.
INSTRUCTION
MANUAL FOR ICO011 1L ALUMINIUM
SODA
SIPHON
3