Solar module
Art. TAS001
TECHNICAL DATA SHEET - 07/2022 - ENG
Icma SpA - Via Garavaglia, 4
20012 Cuggiono (MI) ITALIA
Tel: +39 02 97249134 - +39 02 97249135
www.icmaspa.it - [email protected]
6
Installazion and wall mounting
The fixing of the delivery part (A) and return part (B) to the insulation shell (C) and the supporting plate (D) is made
in the factory by two screws and two washers in the holes (E).
The dowels for the wall fixing are optional.
To install the solar module please proceed as follows:
1. Lay the pipes inside the solar system, leaving enough space for the solar module considering the measures
reported in Tab.2 (page 3).
2. Define the positioning of the module on the wall and mark the position of the 3 holes for the fixing (F).
3. Drill the wall and insert the dowels (dowels are not included).
4. Fix the solar module to the wall and connect it to the system pipes.
5. Check that all unions are properly tight.
6. Proceed with the electrical wiring.
B
A
C
D
E
F
E
F
