Solar module
Art. TAS001
TECHNICAL DATA SHEET - 07/2022 - ENG
Icma SpA - Via Garavaglia, 4
20012 Cuggiono (MI) ITALIA
Tel: +39 02 97249134 - +39 02 97249135
www.icmaspa.it - [email protected]
1
Function
Technical specifications
Product range
The solar module is employed in the primary circuits of solar
systems to manage the thermodynamic cycle of the heat-transfer
fluid between the solar panels and the hot water storage tank.
The TAS001 module is also equipped with electronic controller which,
through a sophisticated monitoring system and safety functions,
ensures the total protection of the system during its operation.
PERFORMANCE
Fluids used:
Water and glycol solutions
Maximum percentage of glycol:
50%
Maximum operating pressure:
10 bar
Calibration of safety valve:
6 bar
Temperature of the heat transfer fluid:
See circulator specifications page 7
Safety valve temperature range:
+160°C
Minimum pressure on the intake side:
See circulator specifications page 7
Opening check valves minimum pressure:
Δp: 2Kpa (200 mm c.a.)
Manometer scale:
0 ÷ 10 bar
Thermometers scale:
0 ÷ 160°C
Circulators:
See circulator specifications page 7
Art.
Size
Circulator
Circulator control
signal
PWM signal
cable
Code
ON/OFF
PWM
TAS001
●
3/4"
Wilo ST 20/6
√
X
X
TAS001AE05
TAS001
●
3/4"
Grundfos 15/6
√
X
X
TAS001AE05G
TAS001
3/4”
Taco ES2 15-70/130
√
X
X
TAS001AES05166
TAS001
3/4”
UPM3 15-75
ELECTRONIC CIRCULATOR
√
√
NOT INCLUDED*
TAS001AE05S163
TAS001
3/4”
Wilo RSTG 15/7.5
ELECTRONIC CIRCULATOR
√
√
INCLUDED
TAS001AE05S164
TAS001
3/4”
Wilo Para ST 15/6
ELECTRONIC CIRCULATOR
√
X
X
TAS001AE05S165
●
Products equipped with circulators “Wilo ST 20/6” and “Grundfos 15/6” are intended for sale in non-EU countries.
*To be purchased separately in case of connection with electronic controller with PWM signal.
