7) Install the color ring onto the connector
as shown in f igure 7.
FIGURE 7
CPLCCT-SLM Tool Instructi ons
Insert the appropriate tip into the BNC spring clip
before ins erting the RCA connector. Ins ert the ti p
so that the slot opening faces up. The tip c an be
stored on the bottom of the tool by screwing it in
place on the underside of the body.
Grasp the body of the tool with your fingers and
start to close the handle of the tool. As the handle
closes, the plunger slides towards the yoke. When
the handle is completel y clos ed against the body,
the c onnector has been terminated.
