FIGURE 6
FIGURE 5
5) Insert the assembled cable with sleev e into the connector housing as shown in f igure 5.
6) Crimp the connector as shown in f igure 6.
Страница 1: ...B or For the 1 RGB orange connector strip the center conductor to 18 AWG and the dielectric to 14 AWG using a wire stripping tool For the 1 5 RGB purple connector strip the center conductor to 14 AWG and the dielectric to 10 AWG using a wire stripping tool www icmcorp net CABLE SERIES RGB TOOL CPLCCT SLM TIP SILVER OR GOLD STRIPPER PS59 6 RGB FIGURE 1 F CONN RCA FOR RGB ...
Страница 2: ...n FIGURE 2 FIGURE 3 FIGURE 4 3 Insert the sleev e ov er the plastic guide until it cov ers the braid that was f olded over during initial preparation as shown in figure 3 4 Holding the cable with sleev e plastic guide f irmly insert the tip as shown in f igure 4 ...
Страница 3: ...FIGURE 6 FIGURE 5 5 Insert the assembled cable with sleev e into the connector housing as shown in f igure 5 6 Crimp the connector as shown in f igure 6 ...
Страница 4: ...nector Insert the tip so that the slot opening faces up The tip can be stored on the bottom of the tool by screwing it in place on the underside of the body Grasp the bodyof the tool with your fingers and start to close the handle of the tool As the handle closes the plunger slides towards the yoke When the handle is completel yclosed against the body the connector has been terminated ...
