
5. After cleaning, properly mount
the main blade again.
Cleaning Side Brush
2. Pull the main blade
clips down to remove
the main blade cover.
1. Flip the robot to show the
bottom side.
Placing a soft cloth under
the robot cleaner will
decrease any chance of
scratch.
1. Use a soft cloth or cotton bud to gently
wipe the main sensor.
2. Use a soft cloth or cotton bud to gently
wipe floor sensors.
1. Hold a side brush with two hands to dissemble it.
2. Use a cleaning brush to clean dust and dirt.
Placing a soft cloth under the robot cleaner will
decrease any chance of scratch.
The side brushes may be
caught in the blade groove
when mounting the main
blade. It is recommended to
remove the side brushes when
mounting the main blade.
Cleaning Sensors
Cleaning the Main Blade
CLIC
K
15
3. After removing the main blade
cover, dissemble the main blade.
4. Clean dust and dirt on the main
blade.
Clean the main blade with caution to avoid the blades from falling off.
3. Use a cleaning brush to clean dust in the filters.
The dust bin can be cleaned with water, but it needs to be dried thoroughly
before being assembled again.
HEPA filter is NOT washable.
Use a regular vacuum machine to clean the filters. However, vacuum in a
distance with a weak power to avoid damaging the filters.
M
ain
te
na
nc
e