3
Assembling your
AccuPro ONE
You will need a cross head screwdriver, one pair of
plyers/grips and an M6 metric spanner.
Tools required:
ASSEMBLING THE SHUTTER PLATE, LOWER FRAME AND STAND:
Locate the lower linkage (13) and place it through the
pivot bracket (12).
1
#22
Push the free end of the lower linkage (13) through the
center hole of the shutter plate.
2
Secure the lower linkage (13) in place using the R pin
small (11C) as shown.
3
Take the two lower frames (7) and attach them to the
hopper body (9) using the M6x60 bolts (5F).
SEE NOTE.
4
NOTE
When placing the legs on the hopper, make sure the two
holes on the side of the lower frame (Item 7) are on the
outside. There should be one hole on the inside.
13
5F
7
7
9