STEP 1
STEP 2
2-1 Assembling Step 1 at first
then use bolt H fixed the C
onto the base E, please noted
the bevel edge should face to
the front( see the amplificatory
picture).
2-2 Insert the armrest
hardware P to B at the location
1 and then turn the B to
location 2 let P embed to the
hardware slot which at the
back side of B.
STEP 3
Place the back frame A on the base E and align
the holes in the back frame with the holes on the
base.Use the screw H in each of the two holes as
shown and tighten with allen key J.
A
H
E
The amplificatory
picture
H
C
B
1
2
Put nut K in the arm rest B. Use
screw I to joint A and B as right
diagram(for B the round part
should facing front) Check to make
sure all screw are tight.(please
note the straight part of the arm
rest PartB should be positioned on
the inside of the chair and the
curved part of the arm where part
K inserted should be on the
outside).
B
I
K
www.icklebubba.com
