background image

Safety Warnings

Thank you for choosing Babyhoot. To ensure that your glider chair and stool is used in accordance 

with these instructions, please read them fully.

Your child’s safety may be affected if you do not follow these instructions.
A child’s safety is your responsibility.
Assembly should be carried out by a competent adult only.

WARNING

: Care should be taken as the underside mechanism of this glider could present a hazard 

to other people when in use.

WARNING

: The footstool is intended to be used for supporting the feet and legs only, not for sitting 

on.

WARNING

: Do not sit on the edge of the seat, armrests or on the backrest as this could cause the 

chair to tip over.

WARNING

: Do not leave children unattended on or beside the chair or foot stool.

• Be aware of the risk of open fire and other sources of heat, such as electric bar fires, gas fires, etc.

in the near vicinity of the glider chair and stool.

• Do not use the glider chair and stool if any part is broken or missing. Use only spare parts approved

by the manufacturer.

• All assembly fittings should be tightened properly and care should be taken to ensure that no

screws are loose, as a child could trap parts of the body, or clothing (e.g. ribbons, drawstrings,

necklaces) this could lead to strangulation.

• Wood is a natural material, the colour will darken with age.
• During assembly children should be kept away from the product due to possible risk of injury.
ROUTINE CARE & MAINTENANCE

Regularly check that all fittings and components of the cot/bed are fully tightened and in working order.

- Wipe away spills immediately to prevent staining.

- Use a cloth dampened with water and/or mild soap or a professional product to clean the fabric - always test

an inconspicuous area first.

- Allow upholstery to dry and brush lightly.

- Cushions are to be dry cleaned only - do not machine wash the cushions.

- For cleaning the chair/stool frame, use only a mild detergent and warm water.

- DO NOT USE BLEACH.

- DO NOT USE any abrasive substances.

- From time to time, check your glider chair and stool for loose screws, and worn parts. Replace or adjust the

parts as needed.

Due to constant updating and improvements, some components may occasionally differ slightly from the 

images shown in these instructions. We reserve the rights to change the specifications of any products without 

prior notice. If you need any assistance please contact your Babyhoot retailer from whom you purchased your 

product, who will take appropriate action.

CONTACT US

Email: [email protected]

Babyhoot is a brand name of Ickle Bubba Ltd

www.icklebubba.com

Содержание Babyhoot Bilsby






Отзывы: