IR-PAD SERIES USER MANUAL
19
8-2 IR Flash Pro Software
IR Flash software arrives installed IR-Pad series tablets. Depending on settings
the software may start when the device is powered on. A copy of the software
is provided on an external USB drive.
Documentation can be found online on the
IR Flash Pro web page under the Downloads section or at this address:
https://infraredcameras.com/ir-flash-pro-manual/
8-2-1 Recommended System Requirements
•
Processor:
i5 or above (Quad Core or better)
•
RAM:
4 GB or above
•
OS:
Windows 8/8.1/10
•
Hard Drive:
256 GB or above
•
Resolution:
1920 x 1080
8-3
Date and Time Settings
Users can change the date and time settings of the device but this does not
change the date and time settings of IR Flash Pro.
Instructions may vary for different versions of the device. Below is a general set
of steps to change the date and time settings:
1.
Click Start.
2. Click Settings
3. Click Time & Language.
4. Click Date & time.
5. Adjust settings.
PERFORM A FACTORY RESET TO RESTORE DEFAULT SETTINGS.
CHANGING THE DATE AND TIME SETTINGS OF THE DEVICE DOES NOT
CHANGE THE DATE AND TIME SETTINGS OF IR FLASH PRO.
