20
measurement.
Area attributes dialog box
Area attributes can amend emissivity, distance, highest
temperature, lowest temperature, average temperature, max
temperature difference and reference temperature.
Left and right key
for choice, press A key for up and down switch. When
Set Ref
is set as
Yes
, the displayed values of other measurements will be their delta
from this measurement.
! NOTE
：
Thermal camera can only select one reference temperature
object
3.3.3
Freeze and save image
There are three ways to save the image:
1.
Press
S
key to freeze the image and then select ”
Save
” to save the
image, or select “
Cancel
” to exit the operation.
2.
Press
Menu
key to activate the main menu. Choose
File->Save
and
the system will initiate the save cycle.
3.
With the “Trigger” parameter, located in Setup->Sys. Setup->Trigger,
set to “Save Key”, pulling and releasing the trigger key will initiate the
save cycle.
3.3.4
Viewing stored Images
There are Two ways to open the image file
：
1
、
Press the Ok key to activate the main menu, select "File Manager" menu ,
