11
[1]
Power key
Press and hold the Power Key for > 3 seconds to power on/off the camera
!
Note
: After powering off, please wait ten seconds before powering the
camera on again
[2]
Menu/Confirm key
Includes
Up
,
Down
,
Left
,
Right
and
Menu/Confirm
(center) keys.
Function varies with operation mode.
In
Menu mode
, it is used for menu selection.
Up
and
Down
keys are for
same level of menu operation.
Left
and
Right
keys are for different levels
menu operation.
Confirm
key (center) is to activate the menu and confirm the
choice.
In
Image mode
, press
Up
or
Down
key to activate X2 digital zoom. The
screen will display “X2” in the upper left corner. Press
Up
or
Down
key to
return to the original image.
In
Spot Measurement
editing mode (activated immediately after adding
a spot or by selecting via the
A
key), press the
Menu
key to pop up the
attribute box. Press four navigation keys to move the spot location.
In line temperature measurement editing mode (activated immediately
after adding a line or by selecting via the
A
key), press the
Menu
key to pop up
the attribute box. If measurement line is horizontal, press
Up
and
Down
keys
to move the line location; press
Left
and
Right
keys to move the reference line.
If measurement line is vertical, press
Left
and
Right
keys to move the line;
press
Up
and
Down
keys to move the reference line.
In area measurement editing mode (activated immediately after adding an
area or by selecting via the
A
key), press the
Confirm
key to pop up the
attribute box. Select in the attribute box the parameter to be edited, either size
or position. Press the four navigation keys to move the area location or change
the size of the area.
[3]
Cancel/Auto Focus key (Marked “C”)
