FMX 300X P-SERIES USER MANUAL
22
L.
M.
K.
Power on the device.
Connect to the device through
an Internet browser.
THE THERMAL IMAGER NEEDS SUFFICIENT WARM-UP TIME FOR THE MOST
ACCURATE TEMPERATURE MEASUREMENTS AND BEST IMAGE QUALITY.
THIS TIME CAN OFTEN VARY BY ENVIRONMENTAL CONDITIONS. IT IS BEST
TO WAIT A MINIMUM OF 10 MINUTES FOR THE DEVICE TO COMPLETELY
WARM-UP.
Use the Hex Wrench to loosen the
lock nuts indicated and adjust the
angle of the device by turning or
rotating the device. Tighten the lock
nuts when device is properly aligned.
0° to 360°
Roll Adjustment
0° to 360°
Horizontal Pan
0° to 90°
Tilt Adjustment
