FMX 300X P-SERIES USER MANUAL
17
7-1 Setup
7.
Quick Start Instructions
USE THE ALIGNMENT GUIDES TO DRILL HOLES FOR SETTING DEVICE SCREWS.
DO NOT USE TOO LONG SCREWS WHEN INSTALLING THE DEVICE. USING
SCREWS THAT ARE TOO LONG MAY DAMAGE THE THERMAL CAMERA.
THE INSTALLATION WALL SHOULD BE ABLE TO BEAR AT LEAST 4 TIMES THE
WEIGHT OF THE CAMERA AND INSTALLATION ACCESSORIES.
THE INSTALLATION WALL SHOULD BE ABLE TO BEAR AT LEAST 4 TIMES THE
WEIGHT OF THE CAMERA AND INSTALLATION ACCESSORIES.
IF THE INSTALLATION SITE IS A CONCRETE WALL OR CEILING, FIRST INSTALL
EXPANSION SCREWS; THEN, INSTALL THE BRACKET. THE INSTALLATION
HOLES OF THE EXPANSION SCREWS NEED TO BE IN LINE WITH THE BRACKET.
THE DEVICE HAS FIXED FOCUS; THEREFORE, BEFORE INSTALLING THE
DEVICE, PLEASE SELECT AN INSTALLATION POSITION AND LENS FOCAL
LENGTH ACCORDING TO THE APPLICATION REQUIREMENTS TO ACHIEVE
THE CORRECT FOCUS.
WHEN TRANSPORTING THE CAMERA, DO NOT LIFT, CARRY, OR PULL THE
DEVICE BY THE CABLE. LIFTING, CARRYING, OR PULLING THE DEVICE BY THE
CABLE MAY AFFECT THE WATERPROOF PERFORMANCE OF THE CAMERA OR
CAUSE WIRING PROBLEMS.
IF THE INSTALLATION SITE IS A WOODEN WALL, USE SELF-TAPPING SCREWS
TO INSTALL THE BRACKET DIRECTLY.