CORONA CAMERA USER MANUAL
46
If the user encounters any problems while using the imager, refer to the following
options. If the problem persists, disconnect the power and contact the customer
support department.
11-1 The imager does not power on
•
Ensure battery is installed
•
Replace old battery
•
Charge battery
11-2 The imager shuts off unexpectedly
•
Replace old battery
•
Charge battery
11-3 No UV image
•
Open the lens cap
•
If lens is foggy, use professional equipment to clean the lens
11-4 Unclear or dark visible images
•
Turn on lights in imaging area
•
If lens is foggy, use professional equipment to clean the lens
11-5 UV readings are incorrect
•
Turn off the device; then, turn it back on
•
Device is at proper height
•
Ensure device is in focus
•
Adjust photon sensitivity
11-6 Camera out of focus
•
Adjust focus ring
11-7 Memory card error
•
Insert memory card
11.
Troubleshooting
