iCharger Battery Charger, Инструкция по эксплуатации

Страница: 18 / 30

50
Refresh mode will start with discharging the rechargeable battery, then charging it. The
repeated discharging and charging cycles will be launched until no further increase in the
measured capacities is estimated.
Note:
By pressing the MODE key within 8 seconds after inserting the rechargeable batteries,
the Refresh mode can be selected. (The mode key shall first be pressed and held for 1
second to activate the mode change. The subsequent pressing of the mode key will
enable to toggle between the “Charge”, “Discharge”, “Test” and “Refresh” mode.)
Then user may also select different discharging current by pressing the CURRENT key
(see “Note” in Discharge mode and Table 2), within 8 seconds after inserting the
Refresh mode (the battery is
being discharged)
Discharging current: 250 mA