406DUO V1.2.0
Synchronous Balance Charger/Discharger
- 38 -
Important Notes
The Charging Principle for Reflex Charge Mode
Power Regenerative Mode
Channel Regenerative Mode
Channel Regenerative Mode is the feature for discharging from one channel to another channel, which supports resistor
discharge, bulbs discharge, and charging battery.
Resistance or Bulbs
Note:
Reflex charge mode only supports NiMH and
Pb battery. It does not support lithium battery.
Using reflex charge mode to charge battery can
reduce effectively the heating of the battery. Go to the
MEMORY SETUP
→
Charge
→
Chg Mode
to select
Reflex
mode
.
Note:
Power Regenerative Mode: which is when the
power supply for the charger acts as "battery power",
the charger will regenerative charge for "battery
power" during the process to discharge the battery.
Go to
MEMORYSETUP
→
Discharge
→
Regenerative
-Mode
to select
To input
mode.
1: Regenerative power
2: Regenerative voltage limit
3: Regenerative current limit
1
2
3
Resistance or bulbs as the load:
1. Connect the resistance or bulbs to any channel of
the charger;
2. In another channel of the charger,
MEMORY
SETUP→ Discharge→ Regenerative Mode→ To
channel,
to select
Resistance or bulbs
，
then connect
the battery for discharging to this channel, and start
the discharge program to discharge the battery.
Press STOP/START button to end the program
during the period.
