406DUO V1.2.0
Synchronous Balance Charger/Discharger
- 24 -
Pb Battery Charge Safety Setup
Click "
" to enter
CHARGE SAFETY SETUP
interface, see details about setting on Page19 LiPo/LiIo/LiFe Battery
Pb Battery Discharge Setup
Select
Program
→
Discharge to
enter
Discharge
setup interface, see details about setting on Page20 LiPo/LiIo/LiFe
Pb Battery Cycle Setup
Select
Program
→
Cycle
to enter
Cycle
setup interface, see details about setting on Page21 LiPo/LiIo/LiFe Battery Cycle
NiZn Battery Charge/Discharge Setup
After adding a program, it will switch to NiZn battery in
Type
option on the
MEMORY SETUP
interface. Set the
Capacity,
the number of
Cells
for NiZn battery cannot be set, and the charger sets
Auto
by default, after editing all
parameters for the program, click"
" to save and return to the previous interface.
As shown in above picture, the program of NiZn has the following modes:
Charge, Discharge
and
Cycle
.
NiZn Battery Charge Setup
Select
Program
→
Charge to
enter
Charge
setup interface.
Note: When the battery cell charging voltage setting exceeds the recommended value (1.9V), the charger will
display a warning and alarm. As long as the user changes the value, the battery type and cell voltage values
on the main interface of charger will display alternately.
NiZn Battery Not Balance Charger Setup
Switch to
Not
Balance
mode on
Chg Mode
interface
,
see details about setting on Page17 LiPo/LiIo/LiFe Battery Not
NiZn Battery Balance Charge Setup
Switch to
Slow
Balance
，
Normal Balance
，
Fast Balance
，
User Balance
on
Chg Mode
interface, see details about setting
on Page17 LiPo/LiIo/LiFe Battery Balance Charge Setup.
Chg Current:
0.05A-40A; default: 2A
Chg Mode:
Slow Balance
，
Fast Balance
，
Normal Balance
，
User Balance,
Not Balance (default)
Chg End Current
1%-50%; default: 10%
Chg Cell Volt
1.2V/Cell-2V/Cell; default: 1.9V/Cell
Cells:
1-6S; default: Auto
