icetro WU-0100A, Руководство техника

Страница: 67 / 166

Operational Checks
ICE THICKNESS CHECK (ICE THICKNESS PROBE)
After a harvest cycle, inspect the ice cubes in the ice
storage bin. The ice bridge connects the ice cubes and
must be set to maintain an ice bridge thickness of 1/8"
(3.2 mm). To adjust the thickness of the bridge refer to ice
thickness adjustment.
ICE THICKNESS ADJUSTMENT
The ice thickness can be adjusted by turning the
adjustment screw on the ice thickness control.
1. If adjustment is necessary, turn the ice thickness
probe adjustment screw clockwise to increase
bridge thickness or counterclockwise to decrease
bridge thickness. Set a 1/4" gap between the ice
thickness probe and evaporator as a starting point.
Then adjust to achieve 1/8” ice thickness.
2. Make sure the ice thickness probe wire and the
bracket do not restrict movement of the probe.
NOTE: Turning the adjustment 1/3 of a turn
will change the ice thickness about 1/16”.
PLACE 1 / 4 " DRILL BIT HERE
TO SET INITIAL GAP
66