icetro ISI-271SHS, Руководство пользователя

Страница: 39 / 85

39
[ 4 - 4 1 ] A t S t a n d b y
[ 4 - 3 9 ] W o r k
[ 4 - 3 9 ] W o r k
[ 4 - 4 0 ] F a n D e l a y T i m e
R e f . V a l v e
H o t g a s V a l v e
R e f . V a l v e
1 . W o r k i n g ? : O n
2 . O n T i m e : 2 4 0 s e c
3 . O f f T i m e : 0 s e c
4-39-2: Refrigeration valve operation time setting
It sets the operation time of refrigeration valve that refrigerates the raw material in the hopper.
Be careful as ice can be formed on the wall of the hopper when the time of this category is
adjusted too much.
4-39-3: Refrigeration valve rest time setting
It sets the rest time of refrigeration valve that refrigerates
the raw material in the hopper.
soft ice can be formed on the wall of the hopper when the
time of this category is too short, and the raw material
in the hopper may not be refrigerated when the time
of this category is too long.
4-39-4: By choosing refrigeration valve operation mode, effective storage of ingredient can be done.
Either : At the operation of either the freezing valve or refrigeration valve, the compressor
starts to operate.
Drum on : Only when the freezing valve operates, refrigeration valve starts to operate.
4-40: Set up compressor cooling fan delay time
This function sets up the delay time in compressor
cooling fan start-up.
4-41: Set up hot gas valve operation in standby mode
Set up the operation of the hot gas valve during
standby status.
4-42: Set up hot gas valve operation in ‘ AUTO’ mode
Set up the operation of the hot gas valve during AUTO
status.
4-39/4-39-1: Refrigeration valve operation selection
It selects the use of operation time of refrigeration valve
that refrigerate the raw material in the hopper.
Activate this category when refrigerating the cylinder and
the hopper with a single compressor.
: 6 0 s e c
4 . C o n d i t i o n : E i t h e r
[ 4 - 4 2 ] A t A u t o
H o t g a s V a l v e
: F u l l O n
: F u l l O n
Explanation of the function buttons (set by an Administrator)