icetro ISI-271SHS, Руководство пользователя

Страница: 30 / 85

30
[ 4 - 1 0 ] T e m p . U n i t
[ 4 - 1 1 ] A m b i e n t T e m p .
C e l s i u s / F a h r e n h e i t
4-11: Environmental temperature detect function setting
The function to detect the environmental temperature
can be turned ON/OFF.
Environmental temperature is the temperature of the air
coming into the compressor.
Therefore, the temperature for this category can be
high and a warning message can be given if the place
of installation is small and has no ventilation.
Then the installation environment must be improved.
4-10: Select between Celsius and Fahrenheit
Select between Celsius (
℃
) and Fahrenheit (
℉
)
The reference voltage measurement must be in accordance with
the measured PCB input voltage.
Explanation of the function buttons (set by an Administrator)
: C
: O n
[ 4 - 9 ] H e a t i n g
1 0 . S t a r t M i n u t e : 0 0
1 1 . A u t o “ A u t o ” : O n
4-9-10: Auto pasteurization start time setting
This sets the time to start auto pasteurization.
Minutes are set in this category.
4-9-11: Auto set after pasteurization
Select whether to execute auto when stand by has completed after pasteurization.
Set this category as ON and execute auto and make sure to open the carburetor hole.
[ 4 - 9 ] H e a t i n g
7 . A ut o H e a t : on
8 . H e a t C y c l e : 1 d a y
9 . S t a r t H o u r : 0 4
4-9-7: Selection of auto pasteurization
Choose ON for auto pasteurization and choose OFF for
no auto pasteurization.
When ON is selected, the following categories are
activated.
4-9-8: Auto pasteurization cycle setting
Execute auto pasteurization according to the date set in this category.
For example, ‘1d a y ’ is everyday, ‘2day’ is every other day, and ‘3day’ is every three days.
Auto pasteurization is alway executed in the auto mode and the standby mode and is not executed
in any other mode.
4-9-9: Auto pasteurization start time setting
This sets the time to start auto pasteurization. Set the hour for this category.
caution