icetro ISI-161TH, Руководство пользователя

Страница: 20 / 48

20
1. Open mix tank cover and put in sufficient
amount of ingredients.
2. Insert the carburetor body and carburetor tube
into the mix tank.
When you move to 'AUTO' mode after 'STAND-BY'
mode, please make sure to insert the carburetor in
fullface, so that you can see the carburetor hole
to prevent clogging.
CARBURETOR BODY
CARBURETOR TUBE
CARBURETOR
IMPELLER
3. Cover the carburetor hole
and insert the impeller.
4. Discharge 300g and pour it back into the mix
tank with the ingredients.
5. Operate the product by pressing
the AUTO button.
6. Open the carburetor hole after
completing operation.
Making soft ice cream
●
The smaller the carburetor hole is, the higher the overrun (air content) is.
Instead, in case of continuous sales, the ingredients supply gets slower and the soft
ice cream is let out slowly.
●
The carburetor hole can get clogged, so check it and wash it periodically during use.
●
The manufacturer shall not be responsible for any trouble (e.g. , spoilage of materials,
overcooling, non-production of ice cream) caused by using materials
in non-frozen state (10℃).
●
To continue sales on the“LOW OUT”condition, please make sure to remove the carburetor
for ice cream dispensing. If dispensing ice cream with the carburetor on, the ingredients
can be left in the mix tank.
For your
information
PASTEURIZE
PASTEURIZE
DEFROST AUTO
WASH
STOP
STAND-BY
STAND-BY MIX-LOW
REGENERATION
BOILIN G