26
We Think of Customer Satisfactio
n
1. Set the power switch on the top right of the front and the switch of the circuit
breaker to 'OFF' and unplug the power cord.
2. Lock the tap and make sure to remove the hoses at the water inlet and outlet ports
in the back of the product.
3. Turn the hand valve to drain water to prevent freezing and bursting
to 9 o'clock(counterclockwise) to remove water from the evaporator.
4. After draining water, turn the hand valve back to 12 o'clock(clockwise) to close
it and reassemble the water inlet and outlet hoses.
[ Water inlet and outlet in the back of the ice maker ]
< Front >
< Back >
Assemble water inlet
/outlet hoses
Open hand valve
Counterclockwise
Clockwise
Close hand valve
Remove water
from condenser
Water from the cooling part
Not closing the hand valve after draining water will cause difficulty with ice making later
since water will be drained directly.
Caution
Power switch
Hand valve
Water outlet
to drain water
from evaporator
Water outlet
for cooling
Circuit
breaker
Removing water from condenser(water cooled type)
Water inlet port
for ice cooling
