background image

13

[Please follow the procedures when moving the machine]

⊙ Please install it in a hygienic  place.
    

◆ Ice is used for edible purposes, so please always install 

         the product in a sanitary and clean place.

⊙ Installation should be indoors.

     ◆ Install the drain at an angle so that drainage is good.
     ◆ Do not install outdoors.

⊙ Install in a child-restricted area.

    ◆ Please be careful about the safety accident of a child 
        and do not let dangerous jokes such as picking up 
        the ice in particular.

⊙ Where good ventilation is secured...

     

 

If the ventilation is poor, the ICE MAKING 

        ability will decrease.

     

 

It is recommended to install it on a flat surface because 

         there is a possibility that the product will fall and cause injury 

         when the installation is made in a sloping place.

⊙ Installation is on a flat ...

     

 An unstable installation may cause vibration and noise

        (Installed within 1˚)

 

 

 

Make sure to observe the following.

  

 Since the product makes use of water, proper water supply and draining facility are required.

  

 Water may leak during installation or operation for diverse reasons. Thus, proper draining must be prepared.

    Since there is danger of electric shock due to moisture from a leak, be sure to observe the following:
    1. When installing the product indoors, be sure to have a natural drainage facility and make 
       the floor waterproof, especially if the floor may get damaged due to leak.
    2. A draining outlet must be available at the installation site; be sure to connect the drain hose.
     3. Make sure that the floor is sloped so that any leaking water gets drained away 
       even if the drain hose gets dislodged or damaged. Install a water overflow prevention 
       wall to prevent damage.

 ※ Adjust the height by turning the footing if the floor is sloped to set it stably.

 ※ The manufacturer will not be liable for any problem arising from failure to comply 
     with the warnings above, dislodged / damaged water supply, or inappropriate drain facility.

Warnning

Содержание ID-0300-AN

































Отзывы: